usb pid loop controller thermocouple input labview

For data rate information see Section 3.1 - Command/Response and Section 3.2 - Stream Mode. Analog input resolution varies from 19.5 bits (RMS or Effective) at max speed (4 ms conversion time), to 22 bits at slower speeds (160 ms conversion time).įor more information about the analog inputs see Section 2.6 - AIN and Appendix A. The U6-Pro has all the features of the normal U6 with the addition of an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. Hardware timed input streaming (supported with hi-speed converter only) has a maximum rate that varies with resolution from 4 ksamples/s at 18 bits to 50 ksamples/s at 16 bits.įor more information see the U6 Datasheet. Input impedance is at least 1 GΩ, with typical input bias currents of only 20 nA.Ĭommand/response (software timed) analog input reads typically take 1-4 ms depending on number of channels and communication configuration. Analog input resolution is 16 bits at max speed (~20 μs conversion time), increasing to 18+ bits at slower speeds (see Section 3.1 - Command/Response and Section 3.2 - Stream Mode). Each analog input can be measured single-ended, or differentially in even/odd pairs. The maximum input range is ☑0 volts, with software selectable gains of x1, x10, and x100. All 14 analog inputs are available on the DB37 connector. AIN0-AIN3 are available on screw terminals and also on the DB37 connector. The LabJack U6 has 14 external analog inputs (AIN0-AIN13). Free examples: C/C++, C#, Python, Java, LabVIEW, MATLAB, VB.NET and more.Ĭonsider the U6-Pro for applications requiring more than 16-bit analog inputs.Free applications to configure, test, and log data to file.

Industrial temperature range (-40 to 85☌).Directly connect thermocouples, load cells, RTDs, and more ….2 analog outputs (expandable using LJTick-DAC).20 Digital I/O lines, 2 counters, and 4 timers.☑0V, ☑V, ☐.1V and ☐.01V Voltage ranges.

14 Analog Inputs (16-18-bit) expandable up to 84 AINs using Mux80 Expansion board.

Common applications include laboratory research, industrial control and monitoring, and prototype development. With instrumentation amplified inputs, and software selectable gain settings, the U6 provides a cost effective, USB only method to measure analog signals which can't be resolved by traditional 12-bit DAQ products. The LabJack U6 is great for acquiring signals from thermocouples, strain gages, bridge circuits, encoders, and nearly any sensor that outputs a voltage or current.

Usb pid loop controller thermocouple input labview